(NEW!!)
Services
Sources
Us
|
Brazing Forum -- Understanding Brazing Processes Better! | ||||||||||
I write articles on brazing each month (in addition to the "Topic" articles listed below) which are currently being posted at three different locations: --- VacAero's website, and --- Industrial Heating magazine's website. --- Heat-Treat Forum's website.
Check these websites regularly for more of my articles on brazing, | in addition to looking at each of the articles shown below! Click on the title of the article you want to read: Topic 1: Why does Brazing require temperatures above 450C (840F)? Topic 2: Can Your Suppliers Hurt You? Topic 3: Watch Out for Differential Metal Expansion! Topic 4: What's This 3T-to-6T Overlap Rule That I Hear About for Braze-Joint Design? Topic 5: Brazing Fluxes Can Be a Good Way to Determine Surface Cleanliness of Parts Topic 6: Wide-Gap Brazing When Parts Don't Fit Well Topic 7: Liquation of Brazing Filler Metals -- Good or Bad? If you found this information helpful, or, if you have questions about what was written in any of the articles, send an e-mail note to: dan@kaybrazing.com
Happy Brazing! | |